Socially and environmentally appropriate urban futures for the motor car

In its relatively short life, the automobile has provided a level of mobility unlikely to have been feasible with a reliance on conventional forms of land based public transport. It has contributed in both a positive and negative way to the quality of life, transforming our cities, our way of life, and giving us a greater command over time and space. Concern over the undesirable social and environmental impacts has increased over time, with calls for governments to take action to reduce the automobile's dominant role. New investment in fixed-track public transport and bus priority systems together with strategies to discourage travel have been proposed to improve accessibility and to aid in cleaning up the physical environment. This paper reviews some of the issues facing society as it works to identify policies to achieve an economically and environmentally sustainabie future. There is a need for a broader set of policies to facilitate alternative land use-transport lifestyles while facing appropriate pricing signals. Some of the key issues are adjustments in the relative prices of location and transport, spatial incentives to make public transport economically viable (i.e. changing urban densities, zoning/incentive changes to allow more infill), road pricing (i.e. charging cars the economic cost of using the roads), new information technology systems (e.g. IVHS) to improve the efficiency and effectiveness of transport infrastructure, major improvements in the fuel efficiency of fossil fuelled vehicles, and alternative-fuelled vehicles (clean-air vehicles).     

美国铁路货车车钩发展及技术研究

简述了美国铁路货车车钩的发展历程、种类和规范标准,分析了美国近几年在铁路货车车钩技术方面的研究情况,找出了我国铁路货车车钩研究的差距并提出了建议。     

地铁头车车体耐撞性仿真分析

在分析国内外有关研究现状的基础上,根据国外有关轨道车辆耐撞性评估的准则、标准,提出评估地铁头车车体耐撞性的碰撞场景设计与条件,即:满载车辆以25km/h的初速度对撞同类型保持静止状态的头车时,车体及吸能结构所吸收的碰撞能量不小于1MJ,头车车体变形不大于100mm。同时,建立某型地铁头车车体对撞有限元模型,处理接触问题及边界条件,实现240ms碰撞过程的数值仿真,并分析车体的速度、加速度、变形、能量的变化趋势。通过对关键参数的仿真分析,评估地铁头车车体的耐撞性。     

铁路参与铁水联运无水港建设的思考

在阐述铁水联运集疏运系统的构成和建立条件的基础上,分析了铁路参与无水港建设的可行性和模式。铁路应通过全面参与无水港建设,加快融入综合运输体系的步伐,可采取改造现有场站设备与设施和新建物流中心两种方式参与无水港建设,同时应注意以下4个问题:采取多种途径解决资金问题;重视信息管理系统建设;提供优质运输服务;注重开发主业副产品。     

基于挠度理论的自锚式悬索桥受力特性分析

基于挠度理论,分析了矢跨比、边中跨比、加劲梁竖向抗弯刚度、加劲梁纵坡和整体升降温对两塔三跨自锚式悬索桥结构受力特性的影响。此外,还讨论了加劲梁在轴向压力作用下的稳定性及其极限跨径。分析结果表明：矢跨比越小,主缆拉力越大、加劲梁的轴向压力也越大,而结构的整体刚度越低;边中跨比越大,结构的整体刚度越低,加劲梁在轴向压力作用下的横向稳定性也越差;主缆抗拉刚度或者加劲梁的竖向抗弯刚度越大,结构的整体刚度越大;加劲梁纵坡和整体升降温对结构受力的影响通常较小,可以忽略不计;自锚式悬索桥的极限跨径由加劲梁的横向第一类失稳及其屈服强度共同控制。     

汽车零部件集中采购决策矩阵

对汽车制造商集中采购和资源分配中出现的问题进行了分析,提出了以价格—索赔率矩阵进行优选供应商、集中采购的方法,解决了如何与供应商实现双赢问题。     

Active Roll Control of Single Unit Heavy Road Vehicles

Summary Strategies are investigated for controlling active anti-roll systems in single unit heavy road vehicles, so as to maximise roll stability. The achievable roll stability improvements that can be obtained by applying active anti-roll torques to truck suspensions are discussed. Active roll control strategies are developed, based on linear quadratic controllers. It is shown that an effective controller can be designed using the LQG approach, combined with the loop transfer recovery method to ensure adequate stability margins. A roll controller is designed for a torsionally flexible single unit vehicle, and the vehicle response to steady-state and transient cornering manoeuvres is simulated. It is concluded that roll stability can be improved by between 26% and 46% depending on the manoeuvre. Handling stability is also improved significantly.     

喷射混凝土在隧道支护中的应用

根据隧道合同段的具体实际情况及施工工艺,通过合理选择喷射混凝土的原材料,精确的配合比设计,正确选择喷射机械和工艺流程,严格控制喷射施工质量,使喷射混凝土作为围岩开挖后的主要支护构件,达到设计的作用效果.     

关于集成化汽车故障诊断系统及其支持技术研究

集成化汽车故障诊断系统有两种不同的体系结构,可由状态检测、信息融合、故障诊断、网络信息获取以及网络通讯等模块构成。在系统分析各模块功能得基础上,论述了检测设备仪器通讯的标准化、故障诊断专家系统的通用化、故障诊断推理方法的多元化和故障诊断知识获取的网络化是实现集成化汽车故障诊断系统的关键性支持技术。     

汽车操纵稳定性的广义汽车转向稳态响应模型

针对传统汽车操纵稳定性理论的线性二自由度模型的不足,构建了一个新的广义汽车转向稳态响应模型,并说明了该模型的广泛适用性。以某不足转向轿车模型的有关参数为例,仿真计算并比较了应用两种模型时该轿车等速圆周行驶时的稳态响应状况,验证了广义模型的正确性,同时得到了一条有别于传统汽车操纵稳定性理论的重要结论。